Cookie Img
Back to top
Home » Products » SMPS » Single Output Switching Power Supply

Single Output Switching Power Supply

Single Output Switching Power Supply
Single Output Switching Power Supply
Product Code : SCN-800
Product Description

Product Description:

SCN-800 Single output switching power supply 
· High reliability, low ripple 
· AC input range selected by switch 
· Protections: Short circuit/ Over load/ Over voltage/ Over    temperature 
· Built-in remote ON-OFF control and remote sense function 
· With parallel function 
· Can adjust from 20%~100% output voltage by external   control 1-5V 
· Forced air cooling by built-in DC fan 
· 1 year warranty 
· Dimensions: 291*132*68mmL*W*H 

Technique parameter:

MODEL

SCN-800-12

SCN-800-15

SCN-800-24

SCN-800-48

OUTPUT

DC Voltage

12V

15V

24V

48V

Voltage Tolerance

±1%

±1%

±1%

±1%

Rated Current

66A

54A

33A

16.6A

Current Range

0-66A

0-54A

0-33A

0-16.6A

Rated Power

800W

800W

800W

800W

Ripple & Noise

150mVp-p

150mVp-p

240mVp-p

480mVp-p

DC Adjustment Range

±5%; Can adjust from 40%~100% output voltage by external control 2-5V

Setup, Rise, Hold Time

800ms, 50ms, 16ms at full load

INPUT

Voltage Range

90130VAC / 180260 VAC4763 Hzselected by switch260370VDC

AC Current

13A/115 VAC 8.0A/ 230 VAC

Efficiency

80%

81%

85%

87%

Inrush Current

60A/230V

Leakage Current

3.5 mA/240VAC

PROTECTION

Over Load

110%135%

Protection: Protection:Current limiting, delay shut down o/p voltage, re-power on to recover

Over Voltage

110%~135%

Protection type: Shut down o/p voltage, re-power on to recover

Over Temp

TSW1(Power transistor) When temp. >100 , shut down o/p voltage, re-power on to recover

ENVIRONMENT

Working Temp., Humidity

-10+6520%90 %RH

Storage Temp., Humidity

-20+8510%95 %RH

Vibration

10200Hz2G 10min./1cycle, period for 60min, each along X, Y, Z axes

SAFETY

Withstand Voltage

I/P-O/P, I/P-FG:1500VAC

Isolation Resistance

I/P-O/P, I/P-FG, >100M Ohms / 500VDC

STANDARD

Safety Standard

Design refer to UL1950,CSA22.2,IEC60950

EMC Standard

Design refer to FCC Part 15 Class A

OTHERS

Weight

2.3Kg;

Packing

8pcs/24.0kg/CARTON

NOTE

1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.

3.Tolerance: includes set up tolerance, line regulation and load regulation.

4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.